其實橋架本身沒有強弱電之分，但在安裝過程中是有一定要求的，高低壓電纜橋架應盡量分開安裝，那么強電橋架和弱電橋架之間的區別是什么呢？

In fact, the bridge itself is not divided into strong and weak current, but there are certain requirements in the installation process. High and low voltage cable bridges should be installed separately as far as possible. What is the difference between strong current bridge and weak current bridge?

電纜橋架用于鋪設電纜，電氣中的電纜在暗處敷設時（埋地或埋在地板、墻內等）例如在車間梁下吊起約300座橋、噴塑電纜橋架、敷設電纜在橋梁上。這里的電纜不需要用保護管（鍍鋅鋼管或塑料管）護套。

Cable tray is used to lay cables. When cables in electrical are laid in the dark (buried or buried in the floor, wall, etc.), for example, about 300 bridges are hoisted under the workshop beam, plastic sprayed cable tray and cables are laid on the bridge. The cable here does not need to be sheathed with protective pipe (galvanized steel pipe or plastic pipe).

通常有梯形橋、槽橋等材料有熱鍍鋅鋼、電鍍鋅、噴塑、玻璃鋼等。目前沒有專門的規范指導，各廠家的規格和形式缺乏普遍性。因此，設計和選型過程中應根據各電氣系統的電纜類型和數量，合理選擇適用的橋架。

There are usually trapezoidal bridges, trough bridges and other materials, such as hot-dip galvanized steel, electro galvanized, plastic spraying, FRP and so on. At present, there is no special specification and guidance, and the specifications and forms of various manufacturers are lack of universality. Therefore, in the process of design and type selection, the applicable bridge shall be reasonably selected according to the cable type and quantity of each electrical system.

事實上電纜橋架本身沒有強電和弱電之分，完全一樣。用這種橋來分配強電稱為強電橋。如果此橋用于弱電，則稱為弱電橋。只是用途上的不同，它們的材質、規格、顏色、安裝方式都是一樣的，外觀上沒有區別。

In fact, the cable tray itself is not divided into strong current and weak current, which is exactly the same. Using this bridge to distribute strong electricity is called strong electricity bridge. If this bridge is used for weak current, it is called weak current bridge. There is no difference in appearance, material and color.

但是，在安裝過程中有一定的要求。大多數強弱電橋不共用，一般設計是分開的。由于強電流會在電纜導體周圍形成強磁場，在電源強時影響弱電流信號，因此應將其隔開或在同一橋架內設置鋼板隔板隔開。

However, there are certain requirements in the installation process. Most strong and weak bridges are not shared and are generally designed separately. Since strong current will form a strong magnetic field around the cable conductor and affect the weak current signal when the power supply is strong, it should be separated or set up a steel plate partition in the same bridge.

山東電纜橋架提醒大家，一般情況下，弱電橋的尺寸比強電橋小，材質和外觀相同。但嚴格來說，在安裝和使用橋梁時，必須將強電和弱電分開，不能放在一座橋上。

Shandong cable bridge reminds you that in general, the size of weak current bridge is smaller than that of strong current bridge, and the material and appearance are the same. But strictly speaking, when installing and using bridges, strong current and weak current must be separated and cannot be placed on one bridge.

強電橋架和弱電橋架之間的區別內容就講解到這里了，如果您對該橋架有需求的話，歡迎關注我們的網站m.ymmgjx.net，我們生產安裝各種橋架，能夠滿足您的需要。

The difference between strong current bridge and weak current bridge is explained here. If you need this bridge, please pay attention to our website www.sddlqj.com Cn, we specialize in the production and installation of various bridges, which can meet your needs.