槽式電纜橋架作為電力工程行業中備受歡迎的產品，槽式電纜橋架在市場上的銷量一直處于一路的狀態，那么槽式電纜橋架的性能如何呢？下面山東電纜橋架廠家為您分析：

As a popular product in the power engineering industry, the sales volume of trough cable trays in the market has always been advanced. What about the environmental performance of trough cable trays? The Shandong cable bridge manufacturer will analyze for you:

槽式電纜橋架的四點性能

Four Environmental Protection Performance of Trough Type Cable Tray

1、成分內不含Ph、cr、Hg等重金屬；

1. The ingredients do not contain heavy metals such as Ph, cr, Hg, etc;

2、歸屬于厚膜型材料，觸變性能好，經充分?jǐn)嚢韬螅偌踊虿患酉♂寗纯赏垦b施工。由于鍍鋅固體分含量高達77％，固線器，一次無氣噴涂可獲得較高的膜厚，減少了有機溶劑的揮發量，降低干燥能耗，這些均有利于環境保護。

2. Belonging to a thick film type material, it has good thixotropic performance. After full stirring, coating can be carried out with little or no diluent. Due to the high solid content of zinc plating up to 77%, high film thickness can be obtained by using a wire bonder and one time airless spraying, reducing the volatilization of organic solvents, and reducing drying energy consumption, all of which are beneficial to environmental protection.

3、經過測試證明：絕大多數鍍鋅的溶劑和稀釋劑內不含甲苯、酮類、鹵代烴等毒性大的有機溶劑。

3. Tests have shown that the vast majority of zinc plating solvents and diluents do not contain toxic organic solvents such as toluene, ketones, halogenated hydrocarbons, etc.

4、電纜橋架廠家槽式電纜橋架是替代熱浸鍍鋅、電弧(熱)噴鋅的好材料，對減少三廢、降低能耗，提高環境保護的社會效益的作用就更加明顯。

4. Cable tray manufacturers' trough type cable tray is a good material to replace hot dip galvanizing and electric arc (hot) spraying zinc, which has a more obvious effect on reducing three wastes, reducing energy consumption, and improving the social benefits of environmental protection.

槽式電纜橋架是以金屬為主要原材料進行加工制作的，因此工人在生產中要注意佩戴手套，防止被金屬割傷；有條件的廠家好為工人配備護目鏡和工作服，這樣對工人的保護更。橋架的生產大多是按照設計圖紙和客戶要求進行加工制作，所以生產前要仔細閱讀圖紙，按照要求調整生產設備上的數值，防止出現尺寸等不合格的產品出現。

Trough type cable trays are manufactured using metal as the main raw material, so workers should pay attention to wearing gloves during production to prevent being cut by metal; Conditional manufacturers are better equipped with goggles and work clothes for workers, which provides more comprehensive protection for workers. The production of the bridge is mostly carried out according to the design drawings and customer requirements, so it is necessary to carefully read the drawings before production, adjust the values on the production equipment as required, and prevent the appearance of unqualified products such as dimensions.

在槽式電纜橋架的加工制作過程中，除了對工人有要求外，生產設備也是注意事項之一。電纜橋架廠家用電是任何生產都要特別注意的事項，生產設備的線路也屬于用電的范圍，啟動機器前好進行徹底檢查，尤其是隔段時間沒有使用的設備，更要注意其開關和線路。關注我們http://m.ymmgjx.net，了解更多事項！

In addition to the requirements for workers, production equipment is also one of the precautions during the processing and manufacturing of trough type cable trays. Cable bridge manufacturers should pay special attention to the safety of electricity use in any production, and the safety of production equipment wiring also belongs to the scope of electricity safety. Before starting the machine, it is necessary to thoroughly inspect, especially for equipment that has not been used for a period of time, and pay more attention to the safety of its switches and wiring. Follow us http://m.ymmgjx.net , learn more!