橋架是道路、鐵路、電力、通信等工程建設中常用的一種橫跨設施，因其涉及到人們的出行和，所以橋架的施工完成后的檢驗關重要。濟南電纜橋架施工完成后的檢驗應包括以下幾個方面：

Bridge is a commonly used crossing facility in road, railway, power, communication and other engineering construction. As it involves people's travel and safety, the inspection of the bridge after construction is crucial. The inspection after the construction of cable tray in Jinan shall include the following aspects:

1.橋架的尺寸檢驗：應根據施工圖紙的要求，對橋架的長度、寬度、高度、斜度進行測量，并與設計尺寸進行對比。如果存在偏差，需要進行修整。

1. Dimensional inspection of the bridge: The length, width, height, and slope of the bridge should be measured according to the requirements of the construction drawings, and compared with the design dimensions. If there is a deviation, it needs to be repaired.

2.橋架的垂直度檢驗：橋架的垂直度對橋架的承載能力和使用壽命有著很大的影響。檢驗時可以使用水平儀等工具進行測量，確保橋架垂直度符合標準要求。

2. Verticality inspection of the bridge: The verticality of the bridge has a significant impact on the bearing capacity and service life of the bridge. During inspection, tools such as a level gauge can be used for measurement to ensure that the verticality of the bridge meets the standard requirements.

3.橋架的橫向和縱向水平度檢驗：這是衡量橋架水平度的另一個重要指標。可以使用水平儀或光纖陀螺儀等工具進行測量。

3. Horizontal and vertical levelness inspection of the bridge: This is another important indicator to measure the levelness of the bridge. Measurements can be made using tools such as a level gauge or fiber optic gyroscope.

4.橋架的平面度和平直度檢驗：這是檢測橋架平面和平直程度的指標。可以使用測量?jī)x器或繩子等進行測量，確保橋架平面度和平直度符合標準要求。

4. Flatness and straightness inspection of the bridge: This is an indicator for detecting the flatness and straightness of the bridge. Measurement instruments or ropes can be used to ensure that the flatness and straightness of the bridge meet the standard requirements.

5.橋架的承載能力和性檢驗：施工完成后，應進行橋架的承載能力和性檢驗。可以進行靜載試驗或動載試驗，檢測其承載能力是否符合標準要求，同時還需要檢查橋架的連接件、防腐保護等，確保橋架的性。

5. Bearing capacity and safety inspection of the bridge: After the construction is completed, the bearing capacity and safety inspection of the bridge should be carried out. Static or dynamic load tests can be conducted to check whether its load-bearing capacity meets the standard requirements. At the same time, it is also necessary to check the connections and anti-corrosion protection of the bridge to ensure the safety of the bridge.

總之，橋架施工完成后的檢驗是確保橋架質量和的關鍵步驟。需要在施工過程中，保證施工標準和質量，并在施工完成后進行的檢驗。更多相關疑惑或者需求，就來我們網站http://m.ymmgjx.net咨詢吧！

In short, the inspection after the completion of bridge construction is a key step to ensure the quality and safety of the bridge. It is necessary to ensure construction standards and quality during the construction process, and conduct comprehensive inspections after the construction is completed. For more related doubts or needs, come to our website http://m.ymmgjx.net Consult!