電纜橋架可以單獨安裝在建筑物中，也可以將機器設備安裝在各種建筑物和支架上。所有部件均熱浸鍍鋅。機器設備無論是室內還是室外，都具有很好的防腐效果。下面分享下橋架的安裝事項以及成品保護的相關內容。
Cable trays can be installed in buildings alone, or machines and equipment can be installed on various buildings and supports. All parts are hot dip galvanized. Both indoor and outdoor machinery and equipment have good anti-corrosion effect. The installation of the lower bridge and the protection of finished products are shared below.
橋架的安裝事項
Installation of bridge
1、梯架與托盤通過連接板連接，并用墊圈、彈簧墊圈和螺母緊固。螺母應位于梯架和托盤的外側。
1. The ladder is connected with the tray through the connecting plate and fastened with washers, spring washers and nuts. Nuts shall be located on the outside of ladders and trays.
2、電橋與電器柜、箱、箱連接時，進出線應與地腳連接緊，用螺絲擰緊，兩端密封。
2. When the bridge is connected with the electrical cabinet, box and box, the incoming and outgoing lines shall be tightly connected with the foundation, screwed and sealed at both ends.
3、橋架通過建筑物變形縫（伸縮縫、沉降縫）時，應將橋架本身斷開，并在槽內搭接一塊內連接板，一端不需搭接。固定的。
3. When the bridge passes through the deformation joint (expansion joint and settlement joint) of the building, the bridge itself shall be disconnected, and an internal connecting plate shall be overlapped in the groove, and one end does not need to be overlapped. changeless.
4、橋梁的直角彎頭、三通、四通應使用廠家提供的相應配件，施工單位不得自行制作；橋蓋應無翹曲角，接口應嚴密整齊。
4. The right angle elbow, tee and cross of the bridge shall use the corresponding accessories provided by the manufacturer, and the construction unit shall not make them by itself; The bridge cover shall have no warping angle, and the interface shall be tight and tidy.
5、電纜橋架穿過防火墻、防火地板時，應采取防火隔離措施。
5. When the cable tray passes through the firewall and fireproof floor, fireproof isolation measures shall be taken.
橋架的成品保護
Finished product protection of bridge
1、安裝電纜橋架時，保持墻壁和屋頂?shù)那鍧崱?/div>
1. Keep walls and roofs clean when installing cable trays.
2、電纜橋架和支架安裝好后，應做好防護，防止其表面被污染或劃傷。
2. After the cable tray and support are installed, they shall be protected to prevent their surfaces from being polluted or scratched.
3、安裝金屬電纜橋架時，應注意保持墻面清潔。
3. When installing metal cable tray, pay attention to keep the wall clean.
4、
山東橋架電纜敷設完成后，橋蓋應完整平整，不得遺漏，以免損壞和污染橋梁。
4. After the cable laying of Shandong bridge is completed, the bridge cover shall be complete and flat without omission, so as to avoid damage and pollution to the bridge.
5、室內電纜沿橋架或橋架敷設時，應在管道和空調工程基本施工完成后進行，以防其他施工損壞電纜。
5. Indoor cables shall be laid along the cable tray or cable tray after the basic construction of pipeline and air conditioning works is completed, so as to prevent cables from being damaged by other professional construction.
6、安裝并鎖好電纜兩端的門窗，防止電纜丟失或損壞。
6. Install and lock the doors and windows at both ends of the cable to prevent cable loss or damage.
以上就是今天所要講解的內容了，相信大家在看完本文的描述之后，能夠?qū)υ摦a(chǎn)品有一定的認識和了解，希望以上內容能幫助到你。另外，若你想要了解更多相關資訊，可以多多關注我們的網站動態
m.ymmgjx.net。
The above is the content to be explained today. I believe that after reading the description of this article, you can have a certain understanding of the product. I hope the above content can help you. In addition, if you want to know more about our website, you can pay more attention to our website at www.sddlqj cn。
濟南火車站
曲阜孔子文化會展中心
山東工藝美院
公安廳服務展示
梯式橋架：工業動力的“呼吸”骨架
