With the continuous progress of the economy and the improvement of people's living standards, people have higher and higher material requirements, including the bridge industry. How much do you know about it? Do you know what are the best ways to repair and maintain the cable tray? Today, Jinan Bridge manufacturer will take you to the following section.

一、修復方法

1、 Repair method:

1、涂層處理

1. Coating treatment

涂層工藝分為刷涂、滾涂。刷涂或者滾涂時每層應從橫交錯反復進行涂，直到均勻?yàn)橹梗荒艹霈F(xiàn)漏涂。

The coating process is divided into brush coating and roll coating. During brushing or rolling coating, each layer shall be applied alternately and repeatedly until it is uniform, and there shall be no missed coating.

2、施工環境要求

2. Construction environment requirements

環境需要通風良好，溫度 好在13℃-30℃，不得低于5℃，相對濕度保持在80%以內。不宜在強烈日光下施工。遇到雨、霧、強風氣候不得在室外進行施工。

The environment needs to be well ventilated, the temperature is good at 13 ℃ - 30 ℃, not less than 5 ℃, and the relative humidity is kept within 80%. It is not suitable for construction under strong sunlight. In case of rain, fog and strong wind, construction shall not be carried out outdoors.

3、銹跡處理

3. Rust treatment

通常橋架采用氯磺化底漆二道進行兩部分除銹，表面除銹處理質量直接影響防腐工程的壽命，現場除銹通常是砂輪機或者人工除銹，在表面處理之后，在4小時內涂上底漆。如果處理不當發現有新銹，需進行重新處理。

Generally, two coats of chlorosulfonated primer are used for two-part derusting of the bridge. The quality of surface derusting treatment directly affects the service life of the anti-corrosion project. The on-site derusting is usually performed by grinding machine or manual derusting. After the surface treatment, the primer is applied within 4 hours. If new rust is found after improper treatment, it shall be treated again.

二、保養妙招

2、 Maintenance Tips

1、橋架廠家建議要定期清理濟南電纜橋架表面的灰塵與銹跡。

1. The bridge manufacturer recommends that the dust and rust on the surface of Jinan cable bridge be cleaned regularly.

2、避免擺放在高溫潮濕地方。

2. Avoid placing in hot and humid places.

3、可用電纜橋架專用的保養蠟進行保養。

3. The cable tray can be maintained with special maintenance wax.

4、避免與腐蝕性液體接觸。

4. Avoid contact with corrosive liquids.

橋架也可以適用于電廠、化工、石化等領域，因?yàn)橛心透g的電纜橋架，非常適用于具有高腐蝕環境的場所。上述就是廠家為大家介紹的電纜橋架的修復及保養妙招的相關內容，希望上述內容能對大家有所幫助，關注我們http://m.ymmgjx.net了解更多！

The bridge can also be used in power plants, chemical, petrochemical and other fields. Because of the corrosion-resistant cable bridge, it is especially suitable for places with high corrosion environment. The above is the related contents of the repair and maintenance tips of cable tray introduced by the manufacturer. I hope the above contents can help you and pay attention to us http://m.ymmgjx.net Learn more!