槽式電纜橋架作為電力工程行業中備受歡迎的產品，槽式電纜橋架在市場上的銷量一直處于一路的狀態，下面山東電纜橋架廠家講解他的四點性能。

As a popular product in the electric power engineering industry, the sales of trough cable tray in the market have been in an advanced state all the time. Now, Shandong cable tray manufacturers will explain their four environmental protection performance.

1、成分內不含Ph、cr、Hg等重金屬；

1. The ingredients do not contain Ph, cr, Hg and other heavy metals;

2、歸屬于厚膜型材料，觸變性能好，經充分攪拌后，少加或不加稀釋劑，即可涂裝施工。由于鍍鋅固體分含量高達77％，固線器，一次無氣噴涂可獲得較高的膜厚，減少了有機溶劑的揮發量，降低干燥能耗，這些均有利于環境保護。

2. It belongs to thick film material with good thixotropy. After full mixing, with little or no thinner, it can be coated. As the solid content of zinc plating is as high as 77%, a high film thickness can be obtained by fixing the wire and once airless spraying, reducing the volatilization of organic solvents and drying energy consumption, which are conducive to environmental protection.

3、經過測試證明：絕大多數鍍鋅的溶劑和稀釋劑內不含甲苯、酮類、鹵代烴等毒性大的有機溶劑。

3. The test shows that most of the solvents and diluents for zinc plating do not contain toxic organic solvents such as toluene, ketones and halohydrocarbons.

4、電纜橋架廠家槽式電纜橋架是替代熱浸鍍鋅、電弧(熱)噴鋅的好材料，對減少三廢、降低能耗，提高環境保護的社會效益的作用就更加明顯。

4. Cable tray manufacturer's trough type cable tray is a good material to replace hot-dip galvanizing and arc (hot) zinc spraying, which plays a more obvious role in reducing the three wastes, reducing energy consumption and improving the social benefits of environmental protection.

槽式電纜橋架是以金屬為主要原材料進行加工制作的，因此工人在生產中要注意佩戴手套，防止被金屬割傷；有條件的廠家好為工人配備護目鏡和工作服，這樣對工人的保護更好。橋架的生產大多是按照設計圖紙和客戶要求進行加工制作，所以生產前要仔細閱讀圖紙，按照要求調整生產設備上的數值，防止出現尺寸等不合格的產品出現。

The trough type cable tray is processed and manufactured with metal as the main raw material, so workers should pay attention to wearing gloves in production to prevent being cut by metal; Manufacturers with conditions are good to equip workers with goggles and work clothes, so as to protect workers better. The bridge is mostly manufactured according to the design drawings and customer requirements, so the drawings should be carefully read before production, and the values on the production equipment should be adjusted according to the requirements to prevent the appearance of unqualified products such as size.

電纜橋架廠家用電是任何生產都要特別注意的事項，生產設備的線路也屬于用電的范圍，啟動機器前好進行檢查，尤其是隔段時間沒有使用的設備，更要注意其開關和線路。更多相關事項就來網站http://m.ymmgjx.net咨詢吧！

The electrical safety of cable tray manufacturers should be paid special attention to in any production. The line safety of production equipment also belongs to the scope of electrical safety. Before starting the machine, it should be checked. Especially for the equipment that has not been used at intervals, it should pay more attention to the safety of its switches and lines. Come to the website for more related matters http://m.ymmgjx.net Consult!