在我們使用組合式橋架過程中，更換組合式橋架是在所難免的，那么在我們更換組合式橋架過程中，有哪些注意事項呢？下面跟著山東電纜橋架廠家一起看看相關的說明內容。

In the process of using the combined cable tray, it is inevitable to replace the combined cable tray. What are the precautions in the process of replacing the combined cable tray? Now let's follow Shandong cable tray manufacturer to see the relevant instructions.

電纜橋架在使用一段時間之后出現腐蝕、老化等現象，須進行更換，否則就會出現各種隱患，如何不及時處理，可能會造成不可預想的災難，給人民帶來生命財產上的重大威脅。

If the cable tray has corrosion, aging and other phenomena after being used for a period of time, it must be replaced, otherwise there will be various potential safety hazards. If it is not handled in time, it may cause unexpected disasters and pose a major threat to people's lives and property.

那么在進行組合式橋架先在更換工作開始之前，要進行會議研討，制定出一套嚴格的措施和施工方案，要經過機動部進行審核，審核通過之后開始準備各種工具氣動球閥，材料，進行人員的分配，安排好各個人員的具體負責事項。在開始動工之前要到施工現場進行實地考察，確定都有哪些組合式橋架需要更換，制定表格，進行詳細記錄。

Before the replacement of the combined bridge, a meeting shall be held to discuss and formulate a set of strict safety measures and construction scheme, which shall be reviewed by the Mechanical Department. After the review, pneumatic ball valves and materials of various tools shall be prepared, personnel shall be allocated, and specific responsibilities of each person shall be arranged. Before the commencement of construction, the construction site shall be inspected to determine which composite bridges need to be replaced, and forms shall be prepared for detailed records.

在吊裝時采用吊裝帶，這樣可以防止施工人員和完好電纜受到損傷。在進行更換過程中，要有專門人員進行保護，防止與作業無關的人員靠近施工現場。組合式電纜組合式橋架廠家介紹將腐蝕嚴重的電纜組合式橋架拆除，安裝新的電纜組合式橋架。將電纜恢復原位置，更換好一節，一切和原來都相同之后，再進行另一節的更換工作。

The hoisting belt shall be used during hoisting to prevent the construction personnel and intact cables from being damaged. In the process of replacement, special personnel shall be assigned for protection to prevent irrelevant personnel from approaching the construction site. The manufacturer of composite cable tray introduced that the severely corroded composite cable tray will be removed and a new composite cable tray will be installed. Restore the cable to its original position and replace one section. After everything is the same as the original, replace another section.

以上就是關于更換組合式橋架的過程事項說明的全部介紹內容，如果還有疑問，歡迎您來電咨詢或者撥打電話詢問我們http://m.ymmgjx.net！

The above is all about the process of replacing the combined cable tray. If you have any questions, please call or call us http://m.ymmgjx.net ！