如今電纜橋架在電力工程傳送中的功效愈來愈關鍵，而很多電力安裝工程都需要應用電纜橋架來鋪裝路線，那么山東橋架在合理布局上應當考慮到哪些方面呢?

Nowadays, the effectiveness of cable tray in power engineering transmission is becoming more and more critical, and many power installation projects need to use cable tray to pave the route, so what aspects should be considered in the reasonable layout of Shandong cable tray?

1.在建筑工程設計中，電纜橋架的布局應依據經濟發展合理化、技術性可行性分析、運作系數等要素綜合性較為，以明確計劃方案，也要充足考慮工程施工安裝、維護保養維修及電纜線鋪設的規定。

1. In the design of construction projects, the layout of cable bridges should be based on the economic development rationalization, technical feasibility analysis, operating safety factor and other factors, so as to clarify the plan, and also fully consider the provisions of engineering construction and installation, maintenance and repair, and cable laying.

2.橋架水準鋪設時距路面的高寬比一般不少于2.5m,豎直鋪設時距路面1.8m下列一部分需加金屬材料后蓋板維護，但鋪設在電氣設備專用型屋子里時以外。電纜橋架水準鋪設在機器設備隔層或馬道且小于2.5m，應采用接地保護對策。

2. When the bridge is laid horizontally, the height width ratio from the road surface is generally not less than 2.5m. When the bridge is laid vertically, the part below 1.8m from the road surface needs to be maintained with a metal back cover, except when it is laid in a special room for electrical equipment. The cable bridge shall be laid horizontally in the machine equipment compartment or catwalk and less than 2.5m, and the grounding protection measures shall be adopted.

3.山東橋架、電線槽以及抗震支架應用在有腐蝕自然環境中，應選用抗腐蝕的剛度原材料生產制造。或采用耐腐蝕解決，耐腐蝕處理過程應考慮工程項目自然環境和使用性能的規定。對耐蝕性能規定較高或規定清潔的場地，宜采用鋁合金型材電纜橋架。

3. Shandong cable tray, wire duct and anti-seismic support shall be used in corrosive natural environment, and shall be manufactured with corrosion-resistant rigid raw materials. Or adopt corrosion resistance, and the natural environment and service performance of the project shall be considered during the corrosion resistance treatment. For sites with high corrosion resistance or clean requirements, aluminum alloy cable tray should be used.

4.電纜橋架在有防火規定的路段內，可在電纜橋架，拖盤內加上具備防火或阻燃特性的板，網等原材料組成封閉式或封閉式式構造。

4. In the road section with fire safety regulations, the cable tray and tray can be added with fire resistant or flame retardant plates, nets and other raw materials to form a closed or enclosed structure.

5.要屏蔽掉干擾信號的電纜線路線.或者有防護外界危害如室外光照，油，腐蝕液體、易燃性煙塵等自然環境規定時.應取用沒孔金屬托盤電纜橋架。

5. When it is necessary to shield the cable route that interferes with the signal, or there are natural environmental regulations for safety protection against external hazards such as outdoor light, oil, corrosive liquid, flammable smoke and dust, the perforated metal tray cable bridge shall be used.

6.在非常容易堆積煙塵的場地，橋架應取用后蓋板;在公共性通道或戶外超越路面段.底層橋架上宜加墊塊或應用沒孔拖盤。

6. In the site where smoke and dust are easy to accumulate, the rear cover plate shall be used for the cable tray; In the public safe passage or outdoor section beyond the road surface, it is better to add cushion blocks or use a trawl without holes on the bottom bridge.

此外不一樣工作電壓、不一樣主要用途的電纜線不適合鋪設在同一層電纜橋架內，具體的相關信息您可以來我們網站http://m.ymmgjx.net進行咨詢了解！

In addition, cables with different working voltages and different main purposes are not suitable for laying in the same layer of cable tray. Please visit our website for specific information http://m.ymmgjx.net Ask about it!