1. Electricians and welders of fiberglass cable trays must hold operation certificates issued by professional exams.

2、焊工對進入現場的電焊機，在使用前應嚴格檢查是否有漏電、短路、接觸不良等現象，否則不得投入使用，嚴禁帶病焊接。工作結束時應及時切斷電源，將焊機蓋上防水材料。

2. Welders should strictly inspect the electric welding machine entering the site for any leakage, short circuit, poor contact, etc. before use, otherwise it cannot be put into use and welding with defects is strictly prohibited. At the end of the work, the power should be cut off in a timely manner and the welding machine should be covered with waterproof materials.

3、嚴格按照電纜橋架操作規程進行施工，不可違章操作、無電工人使用電焊機。電焊工沒有操作證，不可以使用電焊機。

3. The construction shall be carried out in strict accordance with the safe operation procedures for cable tray, and no operation against rules or use of electric welding machine without electrician is allowed. Welders are not allowed to use electric welding machines without operating certificates.

4、用電錘、現場照明燈具等玻璃鋼橋架的零件必須由電工負責接線，并試運正常后方可使用。如場地潮濕，操作者必須穿絕緣鞋，帶絕緣手套，否則不準使用。禁止用鋁絲，銅絲，鐵絲等代替熔斷器。

4. The components of fiberglass cable trays such as electric hammers and on-site lighting fixtures must be wired by electricians and tested for normal operation before use. If the site is damp, operators must wear insulated shoes and gloves, otherwise they are not allowed to use it. It is prohibited to replace fuses with aluminum wire, copper wire, iron wire, etc.

5、電工要嚴格執行玻璃鋼橋架技術操作規程，不可違章操作。在土建工程和其它工程的交叉施工中應做到“一慢、二看、三過”。對施工中發現的不因素應及時與施工負責人聯系，待解決后方可施工，不得進行危險施工。

5. Electricians must strictly follow the safety technical operating procedures for fiberglass cable trays and must not operate in violation of regulations. In the cross construction of civil engineering and other projects, it is necessary to achieve "one slow, two look, and three passes". Any unsafe factors discovered during construction should be promptly contacted by the construction manager, and construction can only be carried out after they are resolved. Dangerous construction is not allowed.

6、進入玻璃鋼橋架施工現場必須戴好帽，按照規定著裝，不戴帽不準進入施工現場。進入施工現場，不可以私自使用各種電動機械、工具和其它設備。現場管理人員必須牢固樹立，預防為主的思想，在生產進度和施工之間發生矛盾時，必須做到，工作人員不得違章指揮施工。

6. When entering the construction site of fiberglass cable trays, one must wear a safety helmet and dress according to regulations. Without wearing a safety helmet, one is not allowed to enter the construction site. Entering the construction site, it is not allowed to use various electric machinery, tools, and other equipment without permission. On site management personnel must firmly establish a safety mindset of putting safety first and prevention first. When there is a conflict between production progress and construction safety, safety must be achieved first, and staff must not command construction in violation of regulations.

本文由山東電纜橋架友情奉獻.更多有關的知識請擊: http://m.ymmgjx.net真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is contributed by cable tray in Shandong Province. For more information, please click: http://m.ymmgjx.net Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned