電纜橋架行業發展非常迅速，但由于電纜橋架和金屬線槽的功能相似，因此很多人想知道山東電纜橋架與金屬線槽的區別是什么，下面就來講講。

　　Cable tray industry is developing very rapidly, but because the function of cable tray and metal trough is similar, so many people want to know what is the difference between shandong cable tray and metal trough, let's talk about it.

　　，橋架是電工用來標準化電纜管道、保護管道中的電纜并將其固定在墻壁或天花板上的工具。橋梁類型有：槽式、托盤式、階梯式、大跨度、網狀、組合式、帶隔墻等。

　　First, Bridges are tools that electricians use to standardize cable ducts, protect cables in ducts, and secure them to walls or ceilings. Bridge types include: trough type, tray type, step type, large span, mesh, combined type, with partition and so on.

　　電工使用線槽對電源、數據和其他電線進行標準分類。它還可以保護電線在線槽中的作用，并將電氣產品固定在墻壁或天花板上。其中線槽型號可分為絕緣線槽、肘節線槽、明線槽、環形線槽、展隔板風管、罩式風管等。因此，通過以上介紹，不難發現它們的功能非常相似。

　　Electricians use troughs to classify power, data, and other wires in a standard way. It can also protect the role of wire in the line slot and secure electrical products to a wall or ceiling. The line groove model can be divided into insulating line groove, elbow joint line groove, open line groove, ring line groove, baffle duct, hood duct, etc. Therefore, from the above introduction, it is not hard to see that their functions are very similar.

　　山東電纜橋架主要用于大直徑電纜的承載和敷設，金屬線槽主要用于電線的承載和敷設。電纜橋架有梯形、開槽、盤式和組合式等多種類型。按材質還可以分為鋁合金、玻璃鋼、冷軋鋼板、鍍鋅、噴涂等。金屬線槽只有一種，采用熱軋鋼板制作。鋪設電纜橋架時，一般應考慮載荷、撓度和填充率。

　　Shandong cable bridge is mainly used for the bearing and laying of large diameter cables, and the metal trough is mainly used for the bearing and laying of wires. Cable tray has trapezoidal, slotted, disc and combined and other types. According to the material can also be divided into aluminum alloy, glass steel, cold rolled steel, galvanized, spraying, etc There is only one kind of metal groove, which is made of hot rolled steel plate. When laying cable Bridges, load, deflection and filling rate should generally be considered.

　　金屬管道大致相當于帶槽的電纜管道，但有些金屬管道更小，地線管道除外。一些需要從橋下連接到配電柜的線路先連接到金屬線槽，然后再連接到配電柜。開放性強的橋梁種類較多，線槽多為封閉材料，多為塑料和金屬。這兩種工程方法的載流能力不同。

　　Metal piping is roughly equivalent to grooved cable piping, but some metal piping is smaller, except for ground piping. Some lines that need to be connected to the switchboard from under the bridge are connected to the metal trough and then to the switchboard. There are many kinds of Bridges with strong openness, and most of the grooves are closed materials, mostly plastic and metal. The current-carrying capacity of the two engineering methods is different.

　　橋架一般采用冷軋鋼板切割而成，線槽采用鍍鋅鐵皮制作。托盤和線槽在手冊中單獨描述。不同的材料在《民用建筑電氣設計規范》中有相應的規定。它們需要按規定使用。

　　The bridge is generally made of cold rolled steel plate cutting, and the slot is made of galvanized iron sheet. Trays and troughs are described separately in the manual. Different materials have corresponding provisions in the Electrical Design Code for Civil Buildings. They need to be used according to regulations.

　　山東電纜橋架與金屬線槽有何不同？看完以上的講解內容，您能區分開了嗎？如果還有不懂得問題，可以來此m.ymmgjx.net進行咨詢。

　　What is the difference between shandong cable tray and metal trough? After reading the above explanation, can you tell the difference? If you still don't know questions, you can go to m.ymmgjx.net for consultation.