電纜線橋自身具備一定的特性，以合理的方式規劃和設計電纜的分布，使它們較少受到空間和建筑設備的影響。那么電纜橋架在安裝時可以優化相關措施這方面內容怎么樣？

　　Cable bridge itself has certain characteristics, in a reasonable way to plan and design the distribution of cables, so that they are less affected by space and architectural equipment. So how about the related measures can be optimized when the cable bridge is installed?

　　施工單位要根據設計圖紙及其說明，對管線走向、整個橋架安裝過程進行深入了解。同時還要考慮到橋架安裝過程中可能出現的橋架是否過長、是否存在變形縫等問題，并且及時地設置相應的補償措施。

　　The construction unit should have an in-depth understanding of the pipeline direction and the entire bridge installation process according to the design drawings and their instructions. At the same time, it should also consider whether the bridge is too long, whether there is deformation joint and other problems that may occur in the installation process of the bridge, and set up the corresponding compensation measures in time.

　　加強對接地線的設置。施工單位在施工過程中，要采用截面積>4mm2的接地線，保證接地線的質量，對于跨接地的線路要進行接地，要把接地干線固定在橋架的支架和吊架上，金屬橋架及其支架和吊架要進行接地處理。

　　Strengthen the Settings of the grounding cables. Construction units in the construction process, to use grounding wire with cross-sectional area >4mm2, to ensure the quality of the grounding wire, grounding for the line across the grounding, to fix the grounding line on the bridge bracket and hanger, metal bridge and its support and hanger to ground processing.

　　對于鍍鋅的電纜橋架，在其連接處要使用連接板進行固定，連接板的兩端可以不使用跨接接地線；還要注意避免將接地干線直接焊接在橋架上，要對電纜橋架?chē)娝軐拥拿撀洳糠诌M(jìn)行去銹處理，再刷防銹漆，防止橋架的腐蝕。

　　For galvanized cable bridge, the connection plate should be used to fix the connection plate, the two ends of the connecting plate can not use the jumper grounding wire; Attention should also be paid to avoid the grounding line directly welded on the bridge, to the off part of the cable bridge spray layer for rust treatment, and then brush anti-rust paint to prevent the corrosion of the bridge.

　　要在電纜橋架的兩端端口、每隔30m的直線段、變形縫的連接兩端處等部位與接地干線連接，要確保電纜橋架存在多于兩處與接地干線連接。

　　To be connected with the grounding line at both ends of the cable bridge port, every 30m straight section, the two ends of the connection of the deformation joint and other parts of the cable bridge, to ensure that there are more than two places connected with the grounding line cable bridge.

　　加強對電纜橋架與管道距離的控制。在安裝時，施工單位要對纜橋架、給排水管道、空調管道、熱力管道等的走向及交叉問題進行綜合考慮，嚴格按照管道走向的布置圖進行安裝，確保電纜橋架與管道之間保持合理的距離。

　　Strengthen the control of the distance between cable tray and professional pipeline. In the installation, the construction unit should take the cable bridge, water supply and drainage pipes, air conditioning pipes, heat pipes, etc. into comprehensive consideration, install strictly in accordance with the layout of the pipeline direction, and ensure that a reasonable distance is kept between the cable bridge and the pipe.

　　山東電纜橋架廠家認為為了確保電纜橋架不設置在熱力管道的上方，應該與熱力管道保持合理的距離，若是電纜橋架與熱力管道距離較近，就要設置相應的隔熱措施。

　　Shandong cable bridge manufacturer thinks that in order to ensure that the cable bridge is not set above the heat pipe, it should keep a reasonable distance from the heat pipe. If the cable bridge is close to the heat pipe, it is necessary to set up the corresponding heat insulation measures.

　　電纜橋架在安裝時可以優化相關措施便是如此了，如果您對該產品有一定的需求的話，歡迎來網站m.ymmgjx.net咨詢了解相關事項。

　　The relevant measures can be optimized when the cable tray is installed. If you have certain needs for the product, welcome to the website m.ymmgjx.net for consultation and understanding of relevant matters.