在以往的社會生活中，鋁合金橋架起到了相當大的作用。但在長期的使用中，它也會出現一些小問題，給我們的生活造成混亂。那么大家知道鋁合金橋架會出現什么問題嗎?下面濟南電纜橋架廠家為您解答。

In the past social life, aluminum alloy bridge has played a considerable role. However, in the long-term use, it will also have some small problems, causing confusion in our lives. Do you know what problems will happen to the aluminum alloy bridge? Now, Jinan cable tray manufacturer will answer for you.

1.可能出現的故障：電纜各部分出現短路現象，這種故障可能造成配電箱上電流繼電器運行不正常，電纜形成的損壞十分嚴重;

1. Possible faults: short circuit occurs in all parts of the cable, which may cause abnormal operation of current relay on the distribution box and serious damage to the cable;

2.可能發生的故障：電纜內部出現短路，這種故障通常是由于電纜質量低劣造成的，在外觀上不會顯露出痕跡;

2. Possible faults: short circuit occurs inside the cable, which is usually caused by poor cable quality and will not show traces in appearance;

3.也許是整個電纜都會被燒斷，也許是某個地方電纜被燒斷了，使電纜的故障非常嚴重;

3. Maybe the whole cable will be burnt out, or the cable in some place will be burnt out, which makes the cable fault very serious;

4.可能出現的故障為鋁合金橋架只有一條短路，故障處電纜損壞較輕，但仍然會有很明顯的痕跡。造成這種問題的原因可能是由于電流過大，或者是電纜質量太差所致。

4. The possible fault is that there is only one short circuit in the aluminum alloy bridge, and the cable at the fault is slightly damaged, but there will still be obvious traces. This problem may be caused by excessive current or poor cable quality.

如何對鋁合金橋架設備進行維護：

How to maintain aluminum alloy bridge equipment:

1.鋁合金橋架設備平衡缸的運動狀態及其潤滑油潤滑系統的油路，接頭等試驗檢驗。

1. Test and inspection of the movement state of the balance cylinder of the aluminum alloy bridge equipment and the oil circuit and joint of the lubricating oil lubrication system.

2.鋁合金橋架設備滑塊和導軌之間經常發生摩擦，需要對其進行必要的調整，并對其接頭部位進行潤滑和管道檢查，以確保正常工作。

2. The sliding block and guide rail of aluminum alloy bridge equipment are often subject to friction, which requires necessary adjustment, lubrication and pipeline inspection of their joints to ensure normal operation.

3.鋁合金橋架設備定期對齒輪部位潤滑：齒輪傳動箱內和內部因頻繁運轉損壞機件，出現松動的可能性較大。

3. The gear parts of the aluminum alloy bridge equipment shall be lubricated regularly: the parts in the gear transmission box and inside are damaged due to frequent operation, and the possibility of looseness is high.

大家平時一定要注意使用該橋架，包括上面提到的問題也可能是由于電流過大或鋼索質量太差造成的。每個人一定要在平時正確操作，定期檢查，便于日后使用。更多相關問題就來我們網站http://m.ymmgjx.net進行咨詢吧！

You must pay attention to the use of this cable tray at ordinary times. The problems mentioned above may also be caused by excessive current or poor quality of steel cables. Everyone must operate correctly at ordinary times and check regularly for future use. More related questions come to our website http://m.ymmgjx.net Consult!