電纜橋架設備的維護非常重要，直接影響設備的使用壽命。清潔設備是維護中的一項重要任務。下面山東電纜橋架廠家為您講解。

The maintenance of cable tray equipment is very important, which directly affects the service life of equipment. Cleaning equipment is an important task in maintenance. Next, Shandong cable tray manufacturer will explain to you.

拆除電纜橋架設備后，應注意將拆下的零件放在工作臺上或支架上，零件分解完成后，要做好標記，避免組裝時的混亂和不便。拆下螺栓、螺母、墊圈和其他需要在煤油或熱蘇打溶液中清洗的零件，清洗所有零件，并在出現之前重新組裝使用的電纜橋架設備。

After the cable tray equipment is removed, the removed parts shall be placed on the workbench or support. After the parts are disassembled, they shall be marked to avoid confusion and inconvenience during assembly. Remove bolts, nuts, washers and other parts that need to be cleaned in kerosene or hot soda solution, clean all parts, and reassemble the cable bridge equipment used before it appears.

當我們在清潔電纜橋架時，我們只需要用一塊干凈的布輕輕地擦拭橋上的灰塵。不要用濕布和酸性化學品擦拭。這會使橋架的耐腐蝕性越來越差。它還會破壞電纜橋架表面涂層的穩定性，甚至造成腐蝕。也可以用光蠟，因為電纜橋架的存放時間變長了，光澤度自然變暗，否則會變亮，先把橋的不干凈的東西清理干凈，再涂上蠟光晾干。既適合美觀，又增強了電纜橋架本身的抗氧化能力。

When we are cleaning the cable tray, we only need to use a clean cloth to gently wipe the dust on the bridge. Do not use wet cloth and acid chemicals to wipe. This will make the corrosion resistance of the cable tray worse and worse. It will also damage the stability of the cable tray surface coating, and even cause corrosion. Light wax can also be used, because the storage time of the cable tray becomes longer, the glossiness will naturally darken, otherwise it will become bright. Clean up the unclean things on the bridge first, and then apply wax to dry. It is not only suitable for beauty, but also enhances the oxidation resistance of the cable tray itself.

當電纜橋架的區域在維修過程中發現被腐蝕時，我們只需要用防腐涂料對其進行干燥，以提高橋架的防腐壽命。厚防腐涂層使橋架質量更加穩定。

When the cable tray area is found to be corroded during maintenance, we only need to dry it with anti-corrosion paint to improve the anti-corrosion life of the cable tray. The thick anti-corrosion coating makes the bridge quality more stable.

在日常維護和檢修中，要經常在有齒輪的地方涂潤滑油，以保證正常運轉。無論是電纜橋架設備還是冷彎滾壓成型設備，每天都要對機器進行檢查。在生產中，也要注意調試和清洗。嚴格遵守生產要求，發現問題及時解決，避免造成重大問題。

During daily maintenance and overhaul, lubricating oil shall be applied to the gear to ensure normal operation. Whether it is cable bridge equipment or cold bending rolling forming equipment, the machine shall be inspected every day. During production, attention should also be paid to debugging and cleaning. Strictly abide by the production requirements, and solve the problems found in time to avoid causing major problems.

清潔電纜橋架是維護中的一項重要任務，您看完以上內容就知道為何這樣說了，對此您有問題就來我們網站http://m.ymmgjx.net咨詢吧！

Cleaning the cable tray is an important task in maintenance. After reading the above content, you will know why it is said like this. If you have any questions, please come to our website http://m.ymmgjx.net Consult!