槽式橋架作為電力工程行業中備受歡迎的產品，槽式橋架在市場上的銷量一直處于一路發展的狀態，山東電纜橋架廠家在生產的時候要注意哪些事項呢及四點性能，下面小編介紹下。

As a popular product in the electric power engineering industry, the sales of trough type cable tray in the market have been developing along the way. What should Shandong cable tray manufacturers pay attention to when producing and the four points of environmental protection performance are introduced below.

槽式橋架的四點性能：

Four points of environmental protection performance of trough type cable tray:

1、成分內不含Ph、cr、Hg等重金屬；

1. The ingredients do not contain Ph, cr, Hg and other heavy metals;

2、歸屬于厚膜型材料，觸變性能好，經充分攪拌后，少加或不加稀釋劑，即可涂裝施工。由于固體分含量高達77％，固線器，一次無氣噴涂可獲得較高的膜厚，減少了有機溶劑的揮發量，降低干燥能耗，這些均有利于環境保護。

2. It belongs to thick film material with good thixotropy. After full mixing, with little or no thinner, it can be coated. As the solid content is as high as 77%, a high film thickness can be obtained by once airless spraying of the fixed wire device, reducing the volatilization of organic solvents and drying energy consumption, which are conducive to environmental protection.

3、經過測試證明：絕大多數的溶劑和稀釋劑內不含甲苯、酮類、鹵代烴等毒性大的有機溶劑。

3. The test shows that most of the solvents and diluents do not contain toxic organic solvents such as toluene, ketones, halohydrocarbons, etc.

4、橋架廠家槽式橋架是替代熱浸、電弧(熱)噴鋅的好材料，對減少三廢、降低能耗，提高環境保護的社會效益的作用就更加明顯。

4. The trough type cable tray manufactured by cable tray manufacturer is a good material to replace hot dip and arc (hot) zinc spraying, which plays a more obvious role in reducing the three wastes, reducing energy consumption, and improving the social benefits of environmental protection.

槽式橋架生產的注意事項：

Precautions for production of trough type cable tray:

槽式橋架是以金屬為主要原材料進行加工制作的，因此工人在生產中要注意佩戴手套，防止被金屬割傷；有條件的廠家為工人配備護目鏡和工作服，這樣對工人的保護更。高分子橋架的生產大多是按照設計圖紙和客戶要求進行加工制作，所以生產前要仔細閱讀圖紙，按照要求調整生產設備上的數值，防止出現尺寸等不合格的產品出現。

The trough type cable tray is processed and manufactured with metal as the main raw material, so workers should pay attention to wearing gloves in production to prevent being cut by metal; Qualified manufacturers provide workers with goggles and work clothes, so as to protect workers more comprehensively. The production of polymer bridge is mostly processed according to the design drawings and customer requirements, so carefully read the drawings before production, adjust the values on the production equipment according to the requirements, and prevent unqualified products such as size.

在槽式橋架的加工制作過程中，除了對工人有要求外，生產設備也是注意事項之一。高分子橋架廠家用電是任何生產都要特別注意的事項，生產設備的線路也屬于用電的范圍，啟動機器前進行檢查，尤其是隔段時間沒有使用的設備，更要注意其開關和線路。

In addition to the requirements for workers, the production equipment is also one of the matters needing attention during the processing and manufacturing of trough type cable tray. The electrical safety of polymer bridge manufacturers should be paid special attention to in any production. The line safety of production equipment also belongs to the scope of electrical safety. Before starting the machine, check it, especially for the equipment that has not been used at intervals. Pay more attention to the safety of its switches and lines.

關于槽式橋架的性能及生產注意事項這個問題，上文已詳細介紹，想了解更多請關注我們的新聞動態http://m.ymmgjx.net，讓您了解更多相關內容！

The environmental protection performance and production precautions of trough type cable tray have been introduced in detail above. For more information, please pay attention to our news http://m.ymmgjx.net , let you know more about it!