您知道安裝電纜橋架需要準備什么嗎?小編想很多人對這些問題都有模棱兩可的答案。讓我們看看在安裝
濟南電纜橋架之前您需要做什么準備工作!
Do you know what needs to be prepared for installing cable tray? I think many people have ambiguous answers to these questions. Let's see what you need to do before installing Jinan cable tray!
技術準備
Technical preparation
(1)設計和施工圖紙以及電纜橋架加工完成。
(1) Design and construction drawings and cable tray processing are completed.
(2)各種電纜橋架技術文件齊全。
(2) All kinds of cable tray technical documents are complete.
(3)安裝電纜橋架結構工作的網站,安裝供暖通風工程。
(3) Installation of cable tray structure work site, installation of heating and ventilation works.
(4)土建工程預留孔的位置和大小應符合設計要求和施工規范。
(4) The position and size of the reserved holes for civil works shall meet the design requirements and construction specifications.

材料準備
stores reserve
(1)電纜橋架及其附件:熱浸鍍鋅后須使用防火,耐火材料和通用型產品。您的型號,規格須符合設計要求。電纜橋架內外應光滑,無毛刺,不應有明顯變形,翹曲和其他變形。
(1) Cable tray and its accessories: after hot-dip galvanizing, fireproof materials and general-purpose products must be used. Your model and specification must meet the design requirements. The inside and outside of the cable tray shall be smooth without burrs, and there shall be no deformation, warping and other deformation.
(2)金屬螺釘:須根據允許的拉伸和切割進行選擇。
(2) Metal screws: must be selected according to the allowable stretching and cutting.
(3)鍍鋅材料:鋼水,圓形,扁平,有角度的螺栓,螺母,螺釘,墊圈,彈簧墊和其它金屬材料作為電工作一部分使用時被電鍍。
(3) Galvanizing material: molten steel, round, flat, angled bolts, nuts, screws, washers, spring washers and other metal materials are galvanized when used as a part of electrical work.
(4)輔助材料:鉆頭,焊接,氧氣,乙炔氣體,涂料混合物,焊料,助焊劑,橡膠絕緣膠帶,塑料絕緣膠帶,黑色膠帶等。
(4) Auxiliary materials: drill bit, welding, oxygen, acetylene gas, paint mixture, solder, flux, rubber insulation tape, plastic insulation tape, black tape, etc.
In addition, for the sake of safety, the participants must hold electrical work certificates and be trained by professional electrical technicians before entering the site. More relevant content will come to our website http://m.ymmgjx.net Consult!