現在不少工程都在使用濟南電纜橋架設備，它的生產可以為我們帶來品質優良的電纜橋架裝置，并且在不同的領域內發揮十分關鍵的作用。想要讓電纜橋架的性能發揮更加優良，除了在生產制作過程當中應該多多注意外，安裝過程內需要掌握的基本事項也很多。

Now many projects are using cable tray equipment in Jinan. Its production can bring us high-quality cable tray devices and play a very critical role in different fields. In order to make the performance of cable tray better, we should pay more attention to the production process and the installation process.

一、電纜橋架在安裝的時候，總平面布置應該保證距離短，這樣在后期運行的時候才能更加，并且符合安裝施工的基本條件，滿足后期維修電纜敷設的要求。

1、 During the installation of cable tray, the general layout should ensure a short distance, so that it can be safer in the later operation, meet the basic conditions of installation and construction, and meet the requirements of cable laying for later maintenance.

二、選擇高品質電纜橋架設備，才能獲得更加優良的產品，保證其電纜橋架的強度以及剛度等都符合規定的要求，可以在后期當中對其電纜達到有效的支撐。

2、 Select high-quality cable tray equipment to obtain better products, ensure that the strength and stiffness of its cable tray meet the specified requirements, and can effectively support its cables in the later period.

三、電纜在敷設之后，其橋架的撓度不可以超過規定的距離，但是如果橋架跨度大于了一定的范圍時，那那么可能會存在撓度產生變化的現象。

3、 After the cable is laid, the deflection of the bridge cannot exceed the specified distance. However, if the span of the bridge exceeds a certain range, there may be changes in deflection.

四、不管是電纜橋架設備的生產制作還是橋架的安裝，都一定要選擇正確的位置。通常橋架的安裝必須在建筑物上進行安裝，并且與土建方面采取緊密配合。

4、 Whether it is the production of cable tray equipment or the installation of cable tray, the correct location must be selected. Usually, the installation of the bridge must be carried out on the building and closely coordinated with the civil engineering profession.

五、如果橋架的安裝需要和工藝管架進行配合，那么切記橋架需要布置在管架的一側旁，并且在平行架設的時候，不應該小于400mm這樣的距離。

5、 If the installation of the bridge needs to be coordinated with the process pipe rack, it is important to remember that the bridge needs to be arranged on one side of the pipe rack, and when installed in parallel, it should not be less than a distance of 400mm.

六、當熱力管道和電纜橋架需要采取平行的架設行為，這個時候如果管道帶有保溫層，那么兩者之間的距離不能低于500毫米，但是如果管道不帶有保溫層的話，那么其相間隔的距離需要采取適當?shù)恼{(diào)整，少要高出一倍左右。

6、 When the thermal pipeline and cable tray need to be erected in parallel, the distance between them should not be less than 500 mm if the pipeline is equipped with insulation layer, but if the pipeline is not equipped with insulation layer, the distance between them should be properly adjusted, at least twice as high.

七、如果這類橋架需要和帶有腐蝕性液體管道進行平行架設的話，那么兩者之間所間隔的距離不能低于500mm。

7、 If this type of bridge needs to be installed parallel to pipelines with corrosive liquids, the distance between the two should not be less than 500mm.

八、電纜橋架如果需要穿墻進入一些比較惡劣的環境當中，這個時候我們建議大家，盡可能在安裝過程當中采取一些符合規定的密封裝置，這樣更能確保后期運行的。

8、 If the cable tray needs to go through the wall and enter into some harsh environment, we suggest that you use some sealing devices that meet the requirements during the installation process as far as possible, so as to ensure the safety of later operation.

通過上面的簡單介紹，相信各位朋友對于電纜橋架設備以及相關產品安裝需要注意的基本設備，已經有了初步的了解。想要深入掌握更多關于電纜橋架的資訊，歡迎大家隨時關注我們網站http://m.ymmgjx.net的更新動態。

Through the above brief introduction, I believe you have a preliminary understanding of the cable tray equipment and the basic equipment that should be paid attention to in the installation of related products. If you want to know more about cable tray, please follow our website at any time http://m.ymmgjx.net Update updates for.