防火橋架與普通橋架在結構、材料、性能和應用場景等方面存在顯著差異，以下是主要區別的綜合分析：

　　There are significant differences between fire-resistant cable trays and ordinary cable trays in terms of structure, materials, performance, and application scenarios. The following is a comprehensive analysis of the main differences:

　　1. 材料與構造

　　1. Materials and Construction

　　防火橋架：通常以金屬（如鍍鋅板）為基材，表面噴涂防火涂料或添加防火隔層（如硅質防火板），涂層厚度一般大于500μm，具有磨砂感。部分型號還采用玻璃鋼等阻燃復合材料。其設計注重密閉性，以槽式結構為主，遇高溫時涂料會膨脹形成炭化隔熱層，阻隔火勢蔓延。

　　Fireproof bridge frame: usually made of metal (such as galvanized sheet) as the substrate, sprayed with fireproof coating or added with fireproof partition layer (such as silicon fireproof board) on the surface, with a coating thickness generally greater than 500 μ m and a frosted feel. Some models also use flame-retardant composite materials such as fiberglass. Its design focuses on airtightness, with a groove structure as the main feature. When exposed to high temperatures, the coating will expand to form a carbonized insulation layer, blocking the spread of fire.

　　普通橋架：多為鍍鋅鋼板或鋁合金制成，表面通過電鍍鋅或冷鍍鋅處理，防腐性能較弱，適用于干燥環境。結構類型包括槽式、梯式、托盤式等，無特殊防火處理。

　　Ordinary bridge frame: mostly made of galvanized steel plate or aluminum alloy, with surface treated by electroplating or cold galvanizing, weak anti-corrosion performance, suitable for dry environments. The structural types include groove type, ladder type, tray type, etc., without special fire protection treatment.

　　2. 防火性能

　　2. Fire resistance performance

　　防火橋架：需符合標準（如GB 8624-2012、CECS24:90），耐火時間通常要求≥1小時（地下車庫等場所），燃燒性能等級為B1級（B-s1,d0），具有阻燃、隔熱、耐高溫特性，能有效延緩火勢蔓延并保護電纜。

　　Fireproof bridge: It must comply with national standards (such as GB 8624-2012, CECS24:90), with a fire resistance time of at least 1 hour (in underground parking lots and other places), a combustion performance level of B1 (B-S1, d0), flame retardant, thermal insulation, and high temperature resistance characteristics, which can effectively delay the spread of fire and protect cables.

　　普通橋架：無防火要求，火災中可能加速火勢蔓延，僅提供電纜支撐和保護功能。

　　Ordinary cable tray: No fire prevention requirements, may accelerate the spread of fire in case of fire, only provides cable support and protection functions.

　　3. 應用場景

　　3. Application scenarios

　　防火橋架：用于消防設備配電線路（如消防水泵、防排煙風機）、商業建筑、醫院、地鐵站等高防火要求場所。部分場景需搭配耐火電纜使用。

　　Fireproof bridge: used for fire equipment distribution lines (such as fire pumps, smoke exhaust fans), commercial buildings, hospitals, subway stations and other high fire protection requirements places. Some scenes require the use of fire-resistant cables.

　　普通橋架：適用于一般室內干燥環境（如辦公樓、工廠），成本較低，滿足常規電纜敷設需求。

　　Ordinary cable tray: suitable for general indoor dry environments (such as office buildings, factories), with low cost, meeting the needs of conventional cable laying.

　　4. 成本與標準

　　4. Costs and Standards

　　防火橋架：因材料和工藝復雜（如防火涂料、多層結構），成本高于普通橋架。需通過嚴格的防火檢測（如耐火極限、煙氣毒性等級）。

　　Fireproof bridge frame: Due to the complexity of materials and processes (such as fireproof coatings and multi-layer structures), the cost is higher than that of ordinary bridge frames. Strict fire safety testing (such as fire resistance limit and smoke toxicity level) is required.

　　普通橋架：依據《TCECS 31-2017》標準，注重經濟性和安裝便利性，防腐處理以鍍鋅為主。

　　Ordinary bridge frame: According to the TCECS 31-2017 standard, emphasis is placed on economy and installation convenience, and anti-corrosion treatment is mainly carried out by galvanizing.

　　5. 其他特性

　　5. Other characteristics

　　與耐久性：防火橋架的涂料常具備、耐油、耐水特性，使用壽命長；普通橋架在潮濕或腐蝕環境中易生銹。

　　Environmental protection and durability: The coating of fireproof bridge often has non-toxic, oil resistant, and water-resistant characteristics, with a long service life; Ordinary cable trays are prone to rusting in damp or corrosive environments.

　　維護要求：防火橋架需定期檢查涂層完整性，普通橋架維護更簡單。

　　Maintenance requirements: Fireproof bridge frames need to be regularly checked for coating integrity, while ordinary bridge frames are easier to maintain.

　　總結

　　summary

　　選擇時需根據項目需求：防火橋架側重性與合規性，普通橋架側重成本與通用性。例如，消防系統必須使用防火橋架，而普通電力布線可選用鍍鋅橋架。

　　When selecting, it should be based on project requirements: fireproof bridge frames focus on safety and compliance, while ordinary bridge frames focus on cost and universality. For example, fire protection systems must use fire-resistant cable trays, while ordinary power wiring can use galvanized cable trays.

　　本文由  山東電纜橋架廠家 友情奉獻.更多有關的知識請點擊  http://m.ymmgjx.net/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a cable tray manufacturer in Shandong For more related knowledge, please click http://m.ymmgjx.net/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.