電纜橋架分為槽型、托盤型、梯型、網孔型等結構，由支架、支撐臂和安裝附件組成。建筑物內的橋架可獨立架設，也可附接于各種建筑物（構筑物）和管廊支架上。應體現結構簡單、外形美觀、配置靈活、維修方便等特點。所有零件都需要鍍鋅，安裝在建筑物外的露天橋上。那么您知道橋架90度彎頭制作的方法和橋架選擇是怎樣的嗎？

Cable trays are divided into trough type, tray type, ladder type, mesh type and other structures, which are composed of supports, support arms and installation accessories. The bridge in the building can be erected independently or attached to various buildings (structures) and pipe gallery supports. It should reflect the characteristics of simple structure, beautiful appearance, flexible configuration, convenient maintenance, etc. All parts need to be galvanized and installed on the open bridge outside the building. Do you know how to make the 90 degree elbow of the bridge and how to choose the bridge?

橋架90度彎頭的制作方法：將橋架中段底板剪成等腰梯形，連接等腰梯形底板的橋架兩側為長方形，然后互換左右兩端的橋架，分別與中間的一座。一段橋?qū)樱附庸潭āｋ娎|橋架分為槽型、托盤型、梯型、網孔型等結構，由支架、支撐臂和安裝附件組成。橋架的選擇。

Fabrication method of 90 degree elbow of bridge: cut the middle bottom plate of the bridge into isosceles trapezoid, the two sides of the bridge connecting the isosceles trapezoid bottom plate are rectangular, and then exchange the bridges at the left and right ends with one in the middle respectively. One section of the bridge is butt welded and fixed. Cable trays are divided into trough type, tray type, ladder type, mesh type and other structures, which are composed of supports, support arms and installation accessories. Selection of bridge.

橋架的選擇

Selection of bridge

1、在工程設計中，應根據經濟合理性、技術可行性、運行性等因素綜合比較橋架的布置方案，確定佳方案，充分滿足施工、安裝、維護和保養的要求。電纜鋪設。

1. In the engineering design, the layout scheme of the bridge shall be comprehensively compared according to the economic rationality, technical feasibility, operation safety and other factors, and the best scheme shall be determined to fully meet the requirements of construction, installation, maintenance and maintenance. Cable laying.

2、橋架水平敷設時，離地高度一般不小于2.5m。垂直敷設時，離地1.8m以下的部分應有金屬罩保護，但敷設在電氣室時除外。如果電纜橋架水平敷設在設備夾層或馬道上且低于2.5m，應采取保護接地措施。

2. When the bridge is laid horizontally, the height from the ground is generally not less than 2.5m. When laying vertically, the part below 1.8m above the ground shall be protected by a metal cover, except when laying in the electrical room. If the cable tray is horizontally laid on the equipment interlayer or Packway and is less than 2.5m, protective grounding measures shall be taken.

3、山東電纜橋架、線槽及其支吊架用于腐蝕性環境，應采用耐腐蝕的剛性材料。或采取防腐處理，防腐處理方式應符合工程要求。

3. Shandong cable tray, trunking and its supports and hangers are used in corrosive environment and should be made of corrosion-resistant rigid materials. Or adopt anti-corrosion treatment, and the anti-corrosion treatment method shall meet the engineering requirements.

此外，對于耐腐蝕或清潔度要求較高的場所，宜選用鋁合金電纜橋架。更多關于橋架的相關事項，您可以來我們網站http://m.ymmgjx.net進行咨詢！

In addition, for places with high requirements for corrosion resistance or cleanliness, aluminum alloy cable trays should be selected. For more information about bridge, you can come to our website http://m.ymmgjx.net Consult!