橋架作為一種智能化的弱電體系，在咱們往常日子中發揮著重要的作用，當然也是需要多加維護的，這樣才能使用的更好，下面來講講在維護橋架過程中的要點內容吧。

As an intelligent weak current system, the bridge plays an important role in our daily life. Of course, it also needs more maintenance, so that it can be used better. Let's talk about the key points in the process of maintaining the bridge.

在日常保護電纜橋架過程中，咱們需要留意切忌運用濕布、硬物抹擦汕漆外表和鏡子、玻璃。切忌與酸、堿性化學物品及油膩物接觸。應堅持居室通風枯燥。電纜橋架應防備擺放在高溫潮濕的當?shù)亍７乐棺屚獗斫佑|到腐蝕性液體，如酒精、指甲油等。

In the daily process of protecting the cable tray, we need to pay attention not to use wet cloth or hard objects to wipe the lacquer surface, mirror and glass. Avoid contact with acid, alkaline chemicals and greasy substances. Should adhere to the room ventilation boring. Cable trays should be placed in places with high temperature and humidity. Prevent the appearance from contacting corrosive liquids, such as alcohol, nail polish, etc.

日常保養：運用干凈的軟布經常性的揩凈外表塵跡便可。

Daily maintenance: use a clean soft cloth to wipe the dust on the surface regularly.

定時保養：用專用的上光蠟平勻涂擦外面，稍待后再用清潔軟布擦亮，使之能靈動轉動和防銹抗氧化。一樣平常可每季度關鍵保養一次。五金配件、金屬拉手可用少些機油抹擦并擦干，防潮。軟軟布揩凈概括塵跡后。

Regular maintenance: evenly smear the outside with special polishing wax, and polish it with a clean soft cloth after a while, so that it can rotate flexibly, prevent rust and oxidation. As usual, the key maintenance can be carried out once a quarter. Hardware accessories and metal handles can be wiped with less engine oil and dried to prevent moisture. Wipe the dust with a soft cloth.

應該用干潔的軟布，運用專用保養蠟。

You should use dry and clean soft cloth and special maintenance wax.

在咱們?nèi)粘＿\(yùn)用橋架的過程中，好的保護方法是十分重要的，那么橋架在保護過程中的要點詳見以上內容，如需了解橋架更多信息請持續關注。

In our daily use of the bridge, good protection methods are very important, so the key points of the bridge in the protection process are detailed in the above content. If you need more information about the bridge, please continue to pay attention.

橋架的所有非導電部分的鐵件均應相互銜接和跨接，使之成為一連續導體，并做好整體接地；每段橋架之間的接地跨接選用編織銅線。

The iron parts of all non-conductive parts of the bridge should be connected and bridged to make it a continuous conductor, and the overall grounding should be done; Braided copper wire shall be selected for grounding jumper between each bridge section.

橋架水平安裝時，支撐跨距一般為1.5—3m，垂直敷設時固定點距離不易大于2m。

When the bridge is installed horizontally, the support span is generally 1.5-3m, and the fixed point distance is not easy to be greater than 2m when it is laid vertically.

橋架應平坦，無歪曲變形，內壁無毛刺，各種附件完全。

The cable tray shall be flat without distortion and deformation, the inner wall shall be free of burrs, and various accessories shall be complete.

橋架接口應平坦，接縫處應嚴密平直。槽蓋裝上后應平坦，無翹角，出線口的方位準確。

The bridge interface shall be flat, and the joint shall be tight and straight. The slot cover shall be flat without warping angle after installation, and the orientation of the outlet shall be accurate.

在吊頂內敷設時，假如吊頂無法上人時應留有檢修孔。

When laying in the ceiling, if the ceiling cannot be accessed, an access hole should be left.

橋架通過建筑物的變形縫時，橋架本身應斷開，槽內用銜接板搭接，不需固定。保護地線和槽內導線應留有補償余量。直線段鋼制橋應認真履行施工規章制度加強對施工人員管理，落實橋架施工技術措施，查看和催促施工人員平安作業，做到文明施工。

When the bridge passes through the deformation joint of the building, the bridge itself should be disconnected, and the joint plate is used in the groove to overlap, which does not need to be fixed. Compensation allowance shall be reserved for the protective ground wire and the conductor in the slot. The construction rules and regulations for steel bridges in straight sections should be carefully implemented, the management of construction personnel should be strengthened, the bridge construction technical measures should be implemented, and the construction personnel should be checked and urged to work safely to achieve civilized construction.

組織施工人員學習施工標準和了解施工圖紙，嚴格依照規劃及有關規則、規范、標準要求進行施工，隨時查看施工質量，發現問題及時整改。

Organize construction personnel to learn construction standards and construction drawings, carry out construction in strict accordance with the planning and relevant rules, specifications and standards, check the construction quality at any time, and rectify problems in time.

對山東電纜橋架施工現場搭設腳手架、并架和施工現場運用的電氣、機械設備、平安防護裝置應符合相關規則并驗收合格后才干運用。

The electrical, mechanical equipment and safety protection devices used in the erection and combination of scaffolds at the construction site of Shandong cable tray and the construction site shall comply with relevant rules and be used only after passing the acceptance.

以上就是問題解答的相關內容了，希望能夠幫助到大家，如對這一問題還存在任何疑問，都?xì)g迎關注我們網站http://m.ymmgjx.net并咨詢我們的工作人員，將竭誠為您服務。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://m.ymmgjx.net And consult our staff, will serve you wholeheartedly.