◆ Mold

穿孔工藝始于精密模具設計，我們認為模具質量在很大程度上決定了產品的質量。因此，近年來，我們投入了大量資源來使我們的建模能力得到顯著提高。

The perforation process begins with precision mold design, and we believe that the quality of the mold largely determines the quality of the product. Therefore, in recent years, we have invested a significant amount of resources to significantly improve our modeling capabilities.

◆ 穿孔 開槽

◆ Perforation and slotting

我們擁有的數控設備，系統罐頭產品質量高，產量可達2,000個，系統罐頭板厚度在0.1mm-25mm之間。開槽孔可以是圓形，方形，菱形和微米。帶孔的梯子和通道托盤通常開在圓孔或方孔中，以進行通風和固定操作。

We have advanced CNC equipment, and the system has high quality canned products with a production capacity of up to 2000. The thickness of the system's canned boards is between 0.1mm-25mm. Slotted holes can be circular, square, diamond shaped, and micrometer shaped. Ladders and channel trays with holes are usually opened in circular or square holes for ventilation and fixing operations.

◆ 切割

◆ Cutting

將板上的全部體積切成制作梯子或通道電纜橋架所需的尺寸。

Cut the entire volume of the board into the dimensions required to make a ladder or channel cable tray.

◆ 切割邊緣

◆ Cutting edges

如果制版過程超出了您的要求范圍，我們熟練的技術人員將根據您的要求幫助您去除多余的邊緣

If the plate making process exceeds your requirements, our skilled technical personnel will assist you in removing excess edges according to your requirements

◆ 將穿孔板

◆ Insert the perforated plate

平整和彎曲成托盤形式我們可以在穿孔板變形之前使用校對機系統，以恢復其原始狀態。0.8mm-12mm的板厚可以完全平整。

We can use a proofreading machine system to restore the original state of the perforated plate before it is deformed and bent into a tray form. A plate thickness of 0.8mm-12mm can be completely flat.

◆ 清潔的

◆ Clean

穿孔工藝需要使用潤滑劑，但是我們還有一個脫脂工藝，可以去除其表面痕跡。

The piercing process requires the use of lubricants, but we also have a degreasing process that can remove surface marks.

◆ 成型件的生產與加工

◆ Production and processing of formed parts

除訂購?fù)猓覀冞€可以為您提供一系列后續加工，包括：平整，切割，貼標，包裝，除油，刺形，退火，噴漆，電鍍，焊接，磨，彎曲，卷等。

In addition to ordering, we can also provide you with a series of subsequent processing, including: leveling, cutting, labeling, packaging, degreasing, shaping, annealing, painting, electroplating, welding, grinding, bending, rolling, etc.

◆多孔金屬電纜橋架的表面處理：共有四種類型，包括粉末涂料，鍍鋅，熱浸，陽極氧化。可以為您定制。

◆ Surface treatment of porous metal cable trays: There are four types, including powder coating, galvanizing, hot dip, and anodizing. We can customize it for you.

打孔，整個和平過程會導致切割和鈑金表面不完整，但是這些不完整在一般工業供應中是可以接受的。如果您有特殊要求，我們將例如通過粉末噴涂或噴漆噴涂，電鍍鋅，熱浸鍍鋅，陽極氧化等附加措施來防止。

Punching, the entire process of smoothing, can result in incomplete cutting and sheet metal surfaces, but these imperfections are acceptable in general industrial supply. If you have special requirements, we will take additional measures such as powder spraying or spray painting, electro galvanizing, hot dip galvanizing, anodizing, etc. to prevent it.